Bond Tite Super Strength 2 Part Epoxy Glue 15ml

Product Details

Bond Tite Super Strength 2 Part Epoxy Glue 15ml

A two part epoxy adhesive system for when extremely high bond strength is required for similar or dissimilar materials

1x 15ml of resin

1 x 15ml of hardener

1 x mixing spatula 

• Working time - 90 mins
• Handling time - 8 hrs
• Full strength - 24hr

Uses
Bondtite Super Strength can be used as an adhesive suitable for bonding metal, ceramic, glass, marble, granite, dry concrete, most 
rigid plastics, bakelite, asbestos, wood, leather etc. It can also be used in insulation, automotives and electronics, for example fixing 
electromagnets to flywheels, bonding brake lining to shoes, plugging holes in cylinder blocks, fixing head light reflector and glass 
to rim, for insulating high speed motors and fixing wipers

Application
Pre-fit parts to be joined. Squeeze an equal volume of material from both Part-A & Part-B tubes. Mix resin and hardener for one minute 
thoroughly and then apply as per requirements. For best results apply a small amount of mixed adhesive to both surfaces and press 
together. The set time is approximately 90 minutes, so there is time for adjustment at the beginning of the period. Remove any excess 
glue immediately with acetone. Support bond for 8 hours at room temperature. Usable strength achieved in 24 hours.